keyword: Web Search:

News

ProductCategory

HY silicone

Your present location:HomeSilicone NewsProduct News > Addition cure silicone rubber encapsulant and potting compound

Addition cure silicone rubber encapsulant and potting compound

Writer:adminSource:www.szrl.net Date:2017-02-10

Number of Addition cure silicone rubber encapsulant and potting compound:
HY-9055 Potting Silicone Rubber
 
Usage of Addition cure silicone rubber encapsulant and potting compound:
filling for LED,LCD electronic display,circuit board.
 
Applications of Addition cure silicone rubber encapsulant and potting compound:
it is applicable to sealing,bonding,coating for electronic parts.
 
HY-9055 is two-component addition cure silicone rubber which can be divided into a transparent type and a flame resistant

type.the product,which can be vulcanized under room temperature or moderate temperature with low viscosity,easy mixing

and pouring ,is applicable to bulk pouring with excellent electrical performance.
 
Features of Addition cure silicone rubber encapsulant and potting compound :
the product has low shrinkage and non-corrosive,the silicone rubber can be used for a long period at the temperature of -60-200

degree with the characteristics of moisture-proof and waterproof,radiation-proof as well as weatherable and anti-ageing. 
(note:vulcanizing under the room temperature or heat curing according to different requirements.
 
Using instruction of Addition cure silicone rubber encapsulant and potting compound :
1.mix the component A and component B evenly according to the proportion and can be used after deaired.
2.the vulcanizing time depends on the temperature in case of heat curing is required.the higher the temperature.the shorter

the vulcanizing time.and the thicker the product,the longer the time.
3.the flame resistant type silicone may produce deposit after long-time placement,mix the component A and componet B

respectively and evenly according to the proportion before using.
 
Standard Datasheet of Addition cure silicone rubber encapsulant and potting compound :

 

Model

HY-9055

Type

General purpose

Component

A

B

Appearance(liquid)

Gray

White

Mixing ratio(%)

1

1

Viscosity (Pa.s)

2.5±0.5

Pot life in 25°C(min)

60~90

Curing time(min)

180 in 25°C or 20 in 80°C

Hardness (shore A°)

55±5

Volume resistivity (Ω)

≥1.0×1015

Dielectric constance(1.2MHz)

3.0~3.3

Dielectric strength (kv/m-1)

≥25

Temperature resistance (°C)

-60~200

Flame retardant

UL94-V1

TypeInfo: Product News

Keywords for the information:addition cure silicone rubber  silicone rubber encapsulant  silicone rubber potting compound 

Related information for reference