ADDITION SILICONE RUBBER FOR SHOES INSOLE MOLD MAKING APPLICATION:(link)
Shoe soles mold making silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.
ADDITION SILICONE RUBBER FOR SHOES INSOLE MOLD MAKING MAIN FEATURES:
E-series liquid silicone rubber is two part addition cure silicone, the mixing ration is 1:1 or 10:1. it has:
1.Good characteristics of easy-operation
2.Good tear and tensile strength
3.Low shrinkage
4.High temperature resistance: 150-220℃
5.Durable and can be used hundreds of times
6.Adjustable Hardness for customers’ requirements
ADDITION SILICONE RUBBER FOR SHOES INSOLE MOLD MAKING MAIN USING INSTRUCTIONS:
Step 1: Take 100 G part A and 100 G part B and mix them evenly.
Step 2: Vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
Step 3: Cleaning the mold
Clean your mold and brush a layer of release agent(detergent or soap water) on your it.
Step 4: Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
ADDITION SILICONE RUBBER FOR SHOES INSOLE MOLD MAKING PACKAGE:
20KG/drum vacuum packing for part A + 20KG/drum vacuum packing for part B
200KG/drum packing for part A +200KG/drum packing for part B

Certificates of HONGYE Addition Cure Mold Making Silicone:

If you have any interest or need more information, welcome to contact now:
Hotline: 86-755-89948019
86-755-89948006
86-755-89948294
E-mail: info@szrl.net
Skype: taylordl828