keyword: Web Search:

ProductCategory

        Your present location:Homesilicone productsProductsGeneral Usage Silicone RubberPlatinum cure silicone rubber > Platinum cure silicone rubber
        • Product Name: Platinum cure silicone rubber
        • Product No.: HongYeSilicone
        • Brand: HongYejJie Silicone
        • Product Usage: latinum cure silicone rubber is mainly used for making molds of concrete stone, GRC, polyurethane pr
        • Commodity price: Negotiable
        • Views : 109

         

        Discription platinum cure silicone rubber
        The mixing ratio of platinum cure silicone rubber is normally 1:1, 10:1, 9:1, It has two parts, both of liquid form, part A is the translucent or other color silicone, part B is platinum curing agent, the mixing ratio is 1:1 or 10:1.

         

        Application platinum cure silicone rubber
        Platinum cure silicone rubber is mainly used for making molds of concrete stone, GRC, polyurethane products; wax, candle decoration ; rapid prototyping and tyre molds, car parts mold making; chocolate, candy, cake and similar products.

         

        Platinum cure silicone rubber also can be used for for bonded seal of electronic components, power module and control module, LED invertor potting, which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB, substrate,

         

        Platinum cure silicone rubber for pad printing, trade mark, textile, filling, sex toy, penis, human parts making, mask, photographic film and television industry props.

         

        Operation instructions

        Platinum cure silicone rubber can be used by hand or machine.
        Here is the operation for mold making
        Step 1: prepare the original molds
        Prepare an perfect original mold and clean it totally before operation .
        *Notes:Make sure your original molds and operation tool cleaned up totally to avoid uncure problem .

        Step 2: Take 100 G part A and 100 G part B (Or 100 G part A and 10 G part B) and mix them evenly.
        *Notes: Addition cure mold making silicon rubber is two part flowing liquid , Pls follow the step strictly:
        1.Weigh the two part exactly by electronic weight..
        If any part not in exactly weight , it may cause changing of hardness , or even cause uncure problem.
        2.Mix part A and part B evenly.
        Otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What’s more, the finished molds will meet a short life. All of these will cause a waste of silicon rubber.

        Step 3: Vacuum pumping
        Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.

        Step 4: Pouring casting or Brush operation
        *Notes:
        1. For simple pattern products we suggest use pouring operation way , which will be very easy to operate and demould. Pourable silicone require light viscosity which will be easy to flow smoothly and easy to de-air .
        2.For delicate pattern products we suggest use brushing operation way , which can copy the pattern exactly . Brushable silicone require high viscosity which won’t be easy to flow away and easy to brush .
        3. We suggest to set the silicone mold for another 12 hours after demould before put into large production.

         

        HONG YE JIE LIQUID SILICONE Packaging & Shipping:
        Sample packaging: 1kg
        Cargo packaging: metal drum and plastic drum: 5kg, 20kg, 25kg and 200kg
        Shippping: Transport as non-dangerous Article
         

        Platinum cure silicone rubber