Hello, welcome to SHENZHEN HONGYEJIE TECHNOLOGY CO., LTD!
Language: 中文版 ∷  英文版
Your location: Home > News > Product News >

Product News

Liquid Silicone Foam Empowers Reliable Sealing

Driven by the expansion of industrial automation, chemical processing, energy equipment and outdoor machinery, the market for durable sealing and cushioning materials has expanded steadily. Industrial machinery, pump and valve assemblies, control cabinets and outdoor equipment require materials that seal fluids, absorb vibration, compensate tolerances and resist harsh environments — all while meeting increasingly strict safety and maintenance standards. As equipment operates under higher loads and longer service intervals, designers increasingly adopt high-performance foam materials for gaskets, seals and cushioning pads. Equipment manufacturers and maintenance suppliers have raised higher standards on material chemical resistance, compression stability and long-term reliability. As a core sealing material, liquid silicone foam from Hong Ye Silicone gains increasing importance in the industrial supply chain.

Industrial sealing applications have special working conditions. Equipment operates in contact with oils, solvents, coolants, cleaning agents and humidity, and components must withstand continuous vibration, pressure and temperature cycling for years. Conventional rubber and polyurethane foams harden, crack and degrade under chemical exposure, lose their sealing force and compress permanently, while their limited temperature range raises reliability concerns in heat-generating processes. In addition, industrial equipment spans large dimensions with complex sealing paths. Poor shrinkage control of foam materials will cause dimensional deviation, seal gaps and leakage risks, and frequent replacement significantly increases cost and downtime for factory operators.

Liquid silicone foam from Hong Ye Silicone is a platinum-cured two-component addition curing silicone rubber with a formula optimized for industrial sealing applications. With a high expansion ratio of 2 times nominal and up to 7 times maximum, the material reduces weight and raw material consumption while maintaining reliable sealing and cushioning. After mixing and foaming, it forms a uniform closed-cell structure with low linear shrinkage, ensuring stable dimensions after curing. Mass-produced gaskets, sealing strips and cushioning pads maintain consistent size, reducing later assembly adjustment and ensuring fit precision on the production line.

In terms of mechanical performance, this foamed silicone delivers high rebound resilience and low compression set. Sealing components undergo repeated compression and vibration throughout their service life, and materials need to recover their shape after every cycle. The high-rebound formula effectively prevents permanent deformation and sealing failure. The cured foam also offers outstanding chemical inertness, moisture resistance, inherent flame retardancy and a wide service temperature range from -65°C to 200°C. After long exposure to oils, solvents, humidity and temperature cycling, it resists aging, swelling and performance decay. One seal can serve for years, greatly reducing maintenance cost and downtime for industrial operators.

For manufacturing adaptability, this liquid silicone foam supports two mainstream processes: mold casting and continuous dispensing. For complex gasket profiles and large cushioning pads, mold casting is widely adopted. Mixed material is poured or injected into the cavity, foams and cures at ambient or elevated temperature, and demolds as a finished sealing or cushioning component. Long linear seals and simple strips can adopt continuous dispensing, where the two components are metered, mixed and applied directly onto the equipment structure. The simple 1:1 mixing ratio and stable foaming behavior eliminate complex equipment adjustments. It can be applied by small sealing workshops as well as large automated equipment production bases.

Industry trends show the global industrial sector is moving toward higher reliability and longer maintenance intervals. Custom sealing orders from automation, chemical processing and energy equipment projects keep rising. Equipment becomes more compact and sealing paths more complex. Downstream manufacturers focus not only on raw material price, but also on comprehensive indicators including chemical resistance, compression set, temperature tolerance and certification compliance. Hong Ye Silicone keeps optimizing formulas, launching liquid silicone foam grades with different densities, hardness and pot life for applications ranging from thin sealing strips to thick vibration-damping pads. Test documents are continuously upgraded to satisfy industrial and environmental compliance requirements of domestic and overseas projects.

Industry insiders state that the final sealing reliability of industrial equipment fundamentally depends on material quality. High-performance liquid silicone foam from Hong Ye Silicone helps convert complex sealing and damping designs from engineering drawings into mass-producible industrial components, lowering manufacturing barriers for sophisticated equipment protection. In the future, with the continuous advancement of industrial automation, chemical processing and energy infrastructure, the market for foamed silicone sealing materials will expand further. Foam material technology will keep upgrading to support the industrial sector in delivering safer, cleaner and longer-lasting equipment.

Related news

CATEGORIES

WeChat qr code close
WeChat qr code