Hello, welcome to HUIZHOU HONGYEJIE TECHNOLOGY CO., LTD!
Language: 中文版 ∷  英文版
Your location: Home > Silicone Technique > FAQ >

FAQ

Operation Instruction of Buddha beads Pouring Mold

Firstly, prepare the necessary tools, such as rulers, knives, brushes, paperboard, etc. Deal with the original molds, put it on the wooden board reasonably, then use the glue to fix it.   Fix the wooden board on the glass plate, spray a layer of release agent on the surface of the mold evenly. Prepare suitable paperboards and fix them around the original mold as a square, leaving space about 2cm between the paperboard and original mold.Then seal the paperboards with hot melt adhesive.   Choose the type of silicone rubber according to the product’s structure, pattern and application. Here we use HY-625 silicone rubber, adding 2%-5% curing agent into the silicone rubber, after curing agent and silicone rubber stir evenly, pour them into the square, shake it evenly.   Vacuum to -0.1MP, which presents the mold made out of bubbles and affect the quality of the mold. Remove paperboards around the silicone mold after it is cured totally and trim down the overflow part of the mold surface. Cut the silicone mold by knife and take out the original mold.   The mold of Buddha beads is finished. We suggest to put the silicone mold into production after 24 hours.

Related news

CATEGORIES

WeChat qr code close
WeChat qr code