keyword: Web Search:

News

ProductCategory

HY silicone

Your present location:HomeSilicone NewsProduct News > Tire Molding Silicone Rubber factory, Specially for Tire Molding Manufacturer

Tire Molding Silicone Rubber factory, Specially for Tire Molding Manufacturer

Writer:adminSource:www.szrl.net Date:2017-01-13

Description of Tire Molding Silicone Rubber factory, Specially for Tire Molding Manufacturer

HY- E series addition molding silicone is generally named two-components silicone 
Rubber, Part A and part B. It features an exceptional fluidity and good operability. 
The mixing ratio is 1: 1 (10: 1), mainly be suitable for making molds application. 

 

Applications of Tire Molding Silicone Rubber factory, Specially for Tire Molding Manufacturer
HY-E620 Silicone Rubberis has been used for years to make tire pattern molds.  HY- E series addition molding silicone could 

be mainly used for making concrete 
Stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and 
Chocolate, candy and any other FDA food product mold making, prototyping etc. 
 
Characteristics of Tire Molding Silicone Rubber factory, Specially for Tire Molding Manufacturer
*low shrinkage (less than 0.1% ) 
*high tensile and tear strength with high copy times 
*easy for operation (mixing ratio at 1: 1 /10: 1) 
*very good flow and easy for pouring operation 
*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat 

 

Notice of Tire Molding Silicone Rubber factory, Specially for Tire Molding Manufacturer
As our E-series silicone is platinum cure silicone, which is very easy to cause 
Cure inhibition, so pls do remember thoroughly clean the model and tool before 
Operation. Besides, pls avoid the liquid E-series silicone contact or mix with the 
Following material, otherwise the silicone won't be cured: 
1. Liquid condensation silicone ( condensation silicone not completely cured or organic 
Tin compounds ) 
2. Sulphur, sulfide and sulfur rubber materials. 
3. Amine compounds as well as contains the amine materials. 
4. Pewter solder flux. 

 

Package of Tire Molding Silicone Rubber factory, Specially for Tire Molding Manufacturer
1kg/drum;5kg/drum; 20kg/drum;25kg/drum;200kg/drum.
For condensation cure silicone: the mixing ratio is 1:1, so if you order 40kg,the package can be 20kg part A and 20kg Part B.
For condesation cure silicone: The mixing ratio is 100:4 and we will provide 4% free catalyst. 
 
Shelf life of Tire Molding Silicone Rubber factory, Specially for Tire Molding Manufacturer
 Twelve(12) months when stored under dry and cool place by original package under 25℃

 


 
 
 

 

TypeInfo: Product News

Keywords for the information:tire molding silicone rubber  silicone rubber factory  tire molding silicone 

Related information for reference