Hello, welcome to HUIZHOU HONGYEJIE TECHNOLOGY CO., LTD!
Language: 中文版 ∷  英文版
Your location: Home > Silicone Technique > FAQ >

FAQ

Industrial-grade tire mold making silicone rubber

Making a tire is somewhat cumbersome, but it becomes much easier if you have a mold made of industrial-grade tire mold making silicone rubber. In this article, I will tell you the secret how to make mold for a tire of a car.   Our company recommends this product model:HY-E620. It has a hardness of 18-22 shore A. HY-E620 silicone rubber for tire is very popular among all the products and has been used developed in our company for many years.         The manufacturing process of making tire mold: 1. Keep the surface and tread groove of the original tire mold dry and clean. 2. Coated the surface of the original mold with release agent and dried with an air gun. The bottom and the four sides of the tire mold should be surrounded with steel plates, and the inside of these steel plates also need to be applied with release agent. 3. Before the operation of making industrial-grade tire molds, we should prepare appropriate silicone products according to the size, structure, usage and performance of tire mold. Mix and stir the two parts of the silicone rubber well. 4. Then, we should not lose sight of the work of vacuuming to exhaust bubbles. 5. Brush a layer of silicone fluid on the surface including the tank, evenly and meticulously. Then, pour the the mixture fluid slowly along a fixed perfusion points. 6. When the tire molding silicone rubber is cured fully, inject some gypsum water into the steel frame until it filled up the frame. 7. Remove the steel frame after 20 minutes. So far the silicone tire mold is completed. 8. Place the prepared tire mold silicone rubber in the steel frame for making the heart of tire mold. 9. Poured the gypsum water into the steel frame slowly. Place a piece of wood board on both sides of the fast curing gypsum respectively, forming an anchoring groove. The purpose is for the convenience of molding. 10. Insert sheet steel in the lateral pattern groove of the completed plaster mold’s heart. 11. Connect eight gypsum mold into a circle, which is made by the same method described above. kerosene sawing into the mold heart and then the heart of tire mold has been finished so far. 12. Placed the gypsum outer mold which is made for the time making silicone mold in outer core. Then put the outer mold and the heart of mold on the steel plate. The gypsum core should be heated to even 600 degrees and be injected of liquid aluminum alloy. Wait for its cooling and being solid after filling. 13.Remove aluminum alloy tire and place it on the tire rims machine for correction to make it in accordance with the standards.   Shenzhen Hong Ye Jie technology Co. Ltd supplies high-class industrial-grade tire mold making silicone rubber in quantity. To bring our customer more considerable value is a solemn mission, and we Hongye men are resolute to go after it all the way. If some parts of the information above have aroused your interests, or you just wanna know more details about it, then you can enter our cellphone entrance: http://m.szrl.net and our computer entrance: http://www.szrl.net. (FAX: 89948030 TEL: 086-755-89948019 086-755-89948006 EMAIL: info@szrl.net).

Related news

CATEGORIES

WeChat qr code close
WeChat qr code