Hello, welcome to HUIZHOU HONGYEJIE TECHNOLOGY CO., LTD!
Language: 中文版 ∷  英文版
Your location: Home > News > Company News >

Company News

pad print silicone for electronic toys

This electronic toys pad print silicone with the advantages of abrasion resistance, high temperature resistance, good printing effect, etc. The curing type is condensation system. Our product is mainly applicable to plastics toys, electroplating products, electronic toys, trademarks and products with irregular pattern. The silicone pad is a medium which transfer patterns on the steel plate onto the electronic toy products' surface. the silicone pad can be suitable for many kinds of surface, not only plain and smooth surface, for it is very soft and of good resilience.     Standard Datasheet:   Appearance:red/yellow/white   Viscosity:≤33000 (cps)   Hardness:28±2 (A°)   Tensile strength:≥3.6 (Mpa)   Tear strength:≥26 (KN/m)   Elongation:≥420 (%)   Mixing ratio:2~3(%)   Pot life:0.5(H)   Demould time:2~4 (H)   How to make pad printing elastomers?   First of all, prepare a mould intended for making printing pads. Also you need a glass rod, a mixing glass cup at hand. Before you start, you need to clean the mould with detergent, drying it.Then, spray a thin and even layer of release agent on the inner surface of the mould so that you can have a convenient demoulding operation. From now on, you can start the moulding operation. Be careful when you add the silicone oil to change the hardness of the pad, for too much silicone oil will damage the pad.   Shenzhen Hongye Jie Silicone factory is specialized in silicone products and their production, research and development, and sales of Science and Technology Corporation. Has an excellent professional performance, superior quality, complete specifications. A wide variety of technical team of silicone rubber products. Welcome customers and dealers to negotiate, expert advice hotline:400 -779-4008, or you can email us info@szrl.net.

Related news

CATEGORIES

WeChat qr code close
WeChat qr code