Hello, welcome to HUIZHOU HONGYEJIE TECHNOLOGY CO., LTD!
Language: 中文版 ∷  英文版
Your location: Home > Silicone Technique > FAQ >

FAQ

Crystal transparent silica gel-HongYe silicone

Crystal transparent silica gel, understand from literal, it is colorless or skin colored oily liquid, after curing, a soft elastic material. The temperature in the range of -65° C to 200 ° C can be used for a long time and keep its soft, elastic properties, electrical properties and chemical stability, water resistance, ozone, weathering, non corrosive, a physiologically inert, non-toxic and tasteless, linear shrinkage rate is low. Crystal transparent silica gel, can be divided into molding transparent silica gel with condensation type transparent silica gel two.         Hony Ye Jie technology specializing in the production of a, the model HY301, two-component molding curing crystal transparent silicone products, suitable for large power LED and the chip LED package. 1, the use of HY-301 This product is dedicated to large power LED device out of turn, has the advantages of high light transmittance, high elasticity and good resistance to UV aging resistance, suitable for large power LED chip LED and the potting and fluoroscopy filling, is the production of high-power LED ideal packaging products. 2, features HY301 is addition curable silicone rubber products ordinary refractive index, with the following features:•the solvent free, no pollution to environment;•high and low temperature performance, but at -50-250 ℃ for long time use;•product flow is good, but potting to subtle, can quickly deep curing;•products excellent performance after curing light;•product ultraviolet resistant performance. 3, HY-301 crystal transparent silica gel using method (1 ) according to the use quantity is accurate and with a certain quality of A components and B components quality; ( 2) A, B good foot in a drying container mixing, stirring and static defoaming or vacuum removing air bubbles; ( 3) the original package cleaning, drying, speak mixed gel into, make its infiltration completely; ( 4) the packaged chip is put into an oven curing. By changing the temperature to change the curing speed, recommended conditions : first in the cured at 100 ℃ for 2H, then in the cured at 150 ℃ for 4H. Please consult the Hongye silicone technology service center: info@szrl.net  if you have any question. Hongye silicone will be happy to provide you with good quality products, and perfect customer service .

Related news

CATEGORIES

WeChat qr code close
WeChat qr code