keyword: Web Search:

ProductCategory

        Your present location:Homesilicone productsProductsNon-toxic Silicone RubberSilicone-breast silicone > Silicone Fake Breast
        • Product Name: Silicone Fake Breast
        • Product No.: HY-E600
        • Brand: HY silicone
        • Product Usage: Making soft silicone rubber products like human body shape , breast pad making, bra pads,patchs.
        • Commodity price: Discuss personally
        • Views : 304

         

        SILICONE FAKE BREAST DESCRIPTION:
        Silicone for Fake Breast is two component addition cure heating or room temperature vulcanizing silicone rubber. The product, which is colorless or skin-colored oily liquid and becomes soft elastic material after vulcanization, can be used for making soft silicone rubber products like human body shape , breast pad making, bra pads, silicone breast and prosthesis, shoulder pads, patchs, anti slip mat, and also can be used for pouring material for electronic and electrical parts.

         

        SILICONE FAKE BREAST APPLICATION:
        FDA liquid silicone Silicone Fake Breast products can be made of flexible silicone rubber products, such as sex products, body shape, body parts, body shape, chest pad, shoulder pads, patch, anti-skid pad, but also for the simulation of human facial silicone mold is mainly used for human face imitation of human body shape , because it is food grade, can be used to produce food mold, high-grade silicone products.

         

        SILICONE FAKE BREAST FEATURES:
        *Excellent electrical properties and chemical stability, nontoxic and odorless
        *Good tensile and tear strength
        *Semi-transparent, oily liquid, curing soft elastic material.
        *FDA certified, medical grade, totally nontoxic, odorless, harmless, and eco friendly
        *Resistance to weathering, non-corrosive,low linear shrinkage, the same type, shape change, easy operation
        * long-term use and to maintain its soft elastic properties.

         

        SILICONE FAKE BREAST OPERATION:

        Step 1: Take 100 G part A and 100 G part B and mix them evenly.

        *Notes: Addition cure mold making silicon rubber is two part flowing liquid , Pls follow the step strictly:
                 1.Weigh the two part exactly by electronic weight..
        If any part not in exactly weight , it may cause changing of hardness , or even cause uncure problem.
                 2.Mix part A and part B evenly.
        Otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What’s more, the finished molds will meet a short life. All of these will cause a waste of silicon rubber.
        Step 2: Vacuum pumping
        Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
        Step 3: Cleaning the mold
        Clean your mold and brush a layer of release agent(detergent or soap water) on your it.
        Step 4: Pour the mixture with correct mixing ratio into the model frame.
        After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

         

        SILICONE FAKE BREAST USING INSTRUCTION:
        As addition cure silicone is a kind of platinum cure system ,which will be easy to cause uncure problem ,so Kindly follow the tips below :
        *Do not mix  with liuqid condensation silicone rubber or even the tool which used for condensation silicone
        *Do not mix  with organic matter which contains N, S, P organics and ionic compound like Sn, As,Hg, Ph,
        *Do not add any pigment or powder into the addition cure silicone rubber without any testing to prevent uncure problem
         


        SILICONE FAKE BREAST PACKAGE:
        5kg/can, 20 kg/drum, or 200 kg/drum.

         

        SILICONE FAKE BREAST SHELF LIFE:
        Twelve(12) months when stored under dry and cool place by original package under 25℃ 

         

        SILICONE FAKE BREAST TECHNICAL PARAMETERS:

        Model

        Color

        Viscosity 

         (cps)

        Hardness

         (A°)

        Tensile

        Strength 

        (Mpa)

        Tear

        Strength

        (kN/m)

        Elongation 

        (≥%)

        Mixing

        ratio

        Operating

        Time(min)

        Curing

        Time(hr, 25℃)

        HY-E600

        Translucent

        2000+1000/-1500

        0

        3.5

        5

        ≥300

        1:1/10:1

        30~60

        3~5

        Note: Above technical datasheet of Silicone Fake Breast is not the fixed  parameters, it's adjustable according to

         customer's requirements.